FAQ

FAQ

IMIBUZO EJWAYELEKILE UKUBUZWA

Iyini impahla yezindlu?

Impahla yezindlu yama-centrifuge ethu amaningi yi-STEEL ewugqinsi.

Izinto ezisetshenziswa kaningi zezindlu ze-centrifuge yiPlastiki nensimbi.Uma kuqhathaniswa nopulasitiki, insimbi iqinile futhi isindayo, iqinile kusho ukuthi iphephe kakhudlwana uma i-centrifuge isebenza, isindayo kusho ukuthi izinzile uma i-centrifuge isebenza.

Yini i-chamber material?

Ibanga lezokwelapha 316 insimbi engagqwali noma Ukudla grade 304 insimbi engagqwali.

Insimbi engagqwali kulula ukuyihlanza futhi inqande ukugqwala.Ama-centrifuge amaningi afakwe esiqandisini e-SHUKE angamakamelo ensimbi engagqwali angu-316, kanti amanye angama-304 ensimbi engagqwali.

Iyini i-variable frequency motor?

I-Motor iyinhliziyo yomshini we-centrifuge, i-motor evame ukusetshenziswa ku-centrifuge iyi-brushless motor, kodwa i-SHUKE isebenzisa i-motor engcono kakhulu---i-variable frequency motor.Uma kuqhathaniswa ne-brushless motor, i-variable frequency motor inempilo ende, isilawuli sesivinini esinembe kakhudlwana, umsindo ophansi futhi ayinawo amandla futhi ayinakulungiswa.

Iyini i-RFID?

Ukuhlonza i-rotor okuzenzakalelayo ye-RFID.Ngaphandle kwe-rotor spin, i-centrifuge ingakwazi ukubona ngokushesha ukucaciswa kwe-rotor, isivinini esikhulu, i-RCF enkulu, usuku lokukhiqiza, ukusetshenziswa nolunye ulwazi.Futhi umsebenzisi akakwazi ukusetha isivinini noma i-RCF ngaphezulu kwesivinini esikhulu se-rotor yamanje noma i-RCF.

faq1 faq2

Iyini i-gyroscope yama-axis amathathu?

I-Three-axis gyroscope inzwa yokungalingani yokuqapha isimo sokudlidliza se-spindle egijima ngesikhathi sangempela, ingathola ngokunembile ukudlidliza okungavamile okubangelwa ukuvuza koketshezi noma ukulayisha okungalingani.Uma ukudlidliza okungavamile kutholakele, kuzothatha isinyathelo sokumisa umshini ngokushesha futhi kusebenze i-alamu yokungalingani.

Yini i-electronic lid lock?

Ama-centrifuge e-SHUKE afakwe isivalo se-electronic lid lock esizimele.Lapho i-rotor ijikeleza, umsebenzisi akakwazi ukuvula isivalo.

Kuyini ukuboniswa kwejika?

Ijika elisheshayo, ijika le-RCF kanye ne-Temperature curve kuboniswa ndawonye, ​​kucace ukubona ukushintsha nobudlelwano babo.

Kuyini ukugcinwa kohlelo?

Umsebenzisi angasetha futhi agcine amapharamitha e-centrifugation asetshenziswa kaningi njengohlelo, ngokuzayo udinga nje ukukhetha uhlelo olulungile, asikho isidingo sokuchitha isikhathi esiningi ukuze usethe futhi.

faq4

Uyini umlando wokugijima?

Ngalo msebenzi, i-centrifuge izoqopha umlando we-centrifugation, okulungele umsebenzisi ukulandelela irekhodi.

faq5

Yini i-multi-stage centrifugation?

Ngaphandle kwalo msebenzi, umsebenzisi kufanele alinde ukuphela kwenqubo yokugcina ye-centrifugation bese usetha inqubo elandelayo ye-centrifugation.Ngalo msebenzi, umsebenzisi udinga nje ukusetha imingcele yenqubo ngayinye ye-centrifugation, bese i-centrifuge izoqedela zonke izigaba ngayinye ngayinye.

faq6

Uyini umsebenzi wokukhiya iphasiwedi?

Umsebenzisi angasetha iphasiwedi ukuze akhiye i-centrifuge ukuze avimbele ukusetshenziswa kabi.

faq7

Uyini umehluko phakathi kwe-rotor ye-angle engaguquki kanye ne-rotor ephumayo?

I-Rotor ephumayo:

● ukusebenza ngesivinini esiphansi, isb 2000rpm

●kumashubhu anamandla amakhulu, isb amabhodlela angu-450ml

● ekusebenzeni ngenani elikhulu lamashubhu ngesikhathi esifanayo, isb, amashubhu angama-56 ka-15ml.

I-engeli engaguquki i-rotor:

●yokusebenza ngesivinini esiphezulu, isb ngaphezu kuka-15000rpm

faq8

UFUNA UKUSEBENZA NATHI?